16
17. PRESET 2 key (green)
Reads out data stored in PRESET 2.
Serves as a jump key to a number one smaller than the step number in the
sequence mode.
18. PRESET 1 key (green)
Reads out data stored in PRESET 1.
Serves as a start/pause key in the sequence mode.
19. A key (green)
Used for current setting. Press the key and rotate the encoder to change the
set value. If the V key is pressed while holding the A key, both LEDs are lit and
the voltage 7-segment LED enters the power display mode.
20. V key (green)
Used for voltage setting. Press the key and rotate the encoder to change the
set value. If the A key is pressed while holding the V key, both LEDs are lit and
the current 7-segment LED enters the power display mode.
