Firmware Installation
9.4
Add Adapter
The Flash Center application uses a variety of adapters, in order to use the Aardvark adapter it must be
added. To add, click “Add Adapters” (
) and select the Aardvark adapter when it appears as
shown in
Figure 16. Add Adapters... Button
Figure 17. Add Adapters Selection
NOTE:
It should automatically detect the Aardvark when adding the adapter; if however, it does not
download the
from Total Phase and follow the installation prompts.
Figure 18. Adapter Detection
40
TPS65982 Evaluation Module
SLVUAF8C – June 2015 – Revised November 2015
Copyright © 2015, Texas Instruments Incorporated
