ATTENTION
STATIC SENSITIVE DEVICES
HANDLE ONLY AT
STATIC SAFE WORK STATIONS
About this Manual
1
About this Manual
This user’s guide describes the TPS65982-EVM. This guide contains an introduction, setup instructions,
the EVM schematic, top and bottom board layouts and component views, internal VDD and GND plane
layouts, and a bill of materials (BOM).
2
Information About Cautions and Warnings
CAUTION
This EVM contains components that can potentially be damaged by
electrostatic discharge. Always transport and store the EVM in its supplied ESD
bag when not in use. Handle using an antistatic wristband. Operate on an
antistatic work surface. For more information on proper handling, see the
Electrostatic Discharge (ESD)
application note (
).
The information in a caution or a warning is provided for your protection. Read each caution and warning
carefully.
3
Items Required for Operation
The following items are required to use the TPS65982-EVM:
•
TPS65982 (
) datasheet
•
TPS65982-EVM
•
Barrel jack AC Adapter, DC power supply, or Tiva™ C-Series LaunchPad to supply power
The following items are recommended for developing firmware for an attached processor to control the
TPS65982-EVM:
•
Tiva C-Series
LaunchPad
•
USB standard-A to mini-B cable
•
Computer with
installed
4
TPS65982 Evaluation Module
SLVUAF8C – June 2015 – Revised November 2015
Copyright © 2015, Texas Instruments Incorporated
