Texas Instruments SimpleLink CC2652RB, Руководство пользователя

Страница: 14 / 70

8.8 Thermal Resistance Characteristics (continued)
THERMAL METRIC
(1)
PACKAGE
UNIT
RGZ
(VQFN)
48 PINS
R
θJB
Junction-to-board thermal resistance 8.0 °C/W
(2)
ψ
JT
Junction-to-top characterization parameter 0.1 °C/W
(2)
ψ
JB
Junction-to-board characterization parameter 7.9 °C/W
(2)
R
θJC(bot)
Junction-to-case (bottom) thermal resistance 1.7 °C/W
(2)
(1) For more information about traditional and new thermal metrics, see Semiconductor and IC Package Thermal Metrics .
(2) °C/W = degrees Celsius per watt.
8.9 RF Frequency Bands
Over operating free-air temperature range (unless otherwise noted).
PARAMETER MIN TYP MAX UNIT
Frequency bands 2360 2500 MHz
8.10 Bluetooth Low Energy - Receive (RX)
When measured on the CC26x2RBEM-7ID reference design with T
c
= 25 °C, V
DDS
= 3.0 V, f
RF
= 2440 MHz with
DC/DC enabled unless otherwise noted. All measurements are performed at the antenna input with a combined RX and TX
path.
All measurements are performed conducted.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
125 kbps (LE Coded)
Receiver sensitivity Differential mode. BER = 10
–3
–102 dBm
Receiver saturation Differential mode. BER = 10
–3
>5 dBm
Frequency error tolerance
Difference between the incoming carrier
frequency and the internally generated carrier
frequency
> (–300 / 300) kHz
Data rate error tolerance
Difference between incoming data rate and the
internally generated data rate (37-byte packets)
> (–240 / 240) ppm
Data rate error tolerance
Difference between incoming data rate and the
internally generated data rate (255-byte packets)
> (–125 / 125) ppm
Co-channel rejection
(1)
Wanted signal at –79 dBm, modulated interferer in
channel,
BER = 10
–3
–1.5 dB
Selectivity, ±1 MHz
(1)
Wanted signal at –79 dBm, modulated interferer at
±1 MHz,
BER = 10
–3
, measured at input level –82 dBm
8 / 2
(2)
dB
Selectivity, ±2 MHz
(1)
Wanted signal at –79 dBm, modulated interferer at
±2 MHz,
BER = 10
–3
, measured at input level –82 dBm
44 / 39
(2)
dB
Selectivity, ±3 MHz
(1)
Wanted signal at –79 dBm, modulated interferer at
±3 MHz,
BER = 10
–3
, measured at input level –82 dBm
46 / 44
(2)
dB
Selectivity, ±4 MHz
(1)
Wanted signal at –79 dBm, modulated interferer at
±4 MHz,
BER = 10
–3
, measured at input level –82 dBm
44 / 46
(2)
dB
Selectivity, ±6 MHz
(1)
Wanted signal at –79 dBm, modulated interferer at
≥ ±6 MHz,
BER = 10
–3
, measured at input level –82 dBm
48 / 44
(2)
dB
CC2652RB
SWRS232D – FEBRUARY 2019 – REVISED FEBRUARY 2021
www.ti.com
14 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated
Product Folder Links: CC2652RB