Texas Instruments SimpleLink CC2652RB, Руководство пользователя

Страница: 18 / 70

8.11 Bluetooth Low Energy - Transmit (TX) (continued)
When measured on the CC26x2RBEM-7ID reference design with T
c
= 25 °C, V
DDS
= 3.0 V, f
RF
= 2440 MHz with
DC/DC enabled unless otherwise noted. All measurements are performed at the antenna input with a combined RX and TX
path.
All measurements are performed conducted.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Spurious emissions and harmonics
Spurious
emissions
(1)
f < 1 GHz, outside restricted
bands
+5 dBm setting < –36 dBm
f < 1 GHz, restricted bands
ETSI
+5 dBm setting < –54 dBm
f < 1 GHz, restricted bands
FCC
+5 dBm setting < –55 dBm
f > 1 GHz, including har5 dBm setting < –42 dBm
Harmonics
(1)
Second harmonic +5 dBm setting < –42 dBm
Third harmonic +5 dBm setting < –42 dBm
(1) Suitable for systems targeting compliance with worldwide radio-frequency regulations ETSI EN 300 328 and EN 300 440 Class 2
(Europe), FCC CFR47 Part 15 (US), and ARIB STD-T66 (Japan).
8.12 Zigbee and Thread - IEEE 802.15.4-2006 2.4 GHz (OQPSK DSSS1:8, 250 kbps) - TX
When measured on the CC26x2RBEM-7ID reference design with T
c
= 25 °C, V
DDS
= 3.0 V, f
RF
= 2440 MHz with
DC/DC enabled unless otherwise noted. All measurements are performed at the antenna input with a combined RX and TX
path.
All measurements are performed conducted.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
General Parameters
Max output power Differential mode, delivered to a single-ended 50-Ω load through a balun 5 dBm
Output power
programmable range
Differential mode, delivered to a single-ended 50-Ω load through a balun 26 dB
Spurious emissions and harmonics
Spurious emissions
(1)
(2)
f < 1 GHz, outside restricted
bands
+5 dBm setting
< -36 dBm
f < 1 GHz, restricted bands
ETSI
< -47 dBm
f < 1 GHz, restricted bands
FCC
< -55 dBm
f > 1 GHz, including
harmonics
< –42 dBm
Harmonics
(1)
Second harmonic < -42 dBm
Third harmonic < -42 dBm
IEEE 802.15.4-2006 2.4 GHz (OQPSK DSSS1:8, 250 kbps)
Error vector
magnitude
+5 dBm setting 2 %
(1) Suitable for systems targeting compliance with worldwide radio-frequency regulations ETSI EN 300 328 and EN 300 440 Class 2
(Europe), FCC CFR47 Part 15 (US), and ARIB STD-T66 (Japan).
(2) To ensure margins for passing FCC band edge requirements at 2483.5 MHz, a lower than maximum output-power setting or less than
100% duty cycle may be used when operating at 2480 MHz.
CC2652RB
SWRS232D – FEBRUARY 2019 – REVISED FEBRUARY 2021
www.ti.com
18 Submit Document Feedback Copyright © 2021 Texas Instruments Incorporated
Product Folder Links: CC2652RB