Texas Instruments NS/CLM/1L1/B - NSpire Math And Science Handheld Graphing Calculator Скачать руководство пользователя страница 15

Страница: 15 / 144

$background image$

Getting Started

Initial startup

The TI-Nspire™ math and science learning handheld uses four AAA
batteries, which are provided with the product.

Replacing batteries

Caution:

When removing the keypad to change batteries, be certain

that the handheld is completely powered down. Removing the keypad
before the display is cleared may result in loss of data.

Battery Precautions

Take these precautions when replacing batteries.

•

Do not leave batteries within the reach of children.

•

Do not mix new and used batteries. Do not mix brands, or types
within brands, of batteries.

•

Do not mix rechargeable and non-rechargeable batteries.

•

Install batteries according to polarity (+ and -) diagrams.

•

Do not place non-rechargeable batteries in a battery recharger.

•

Properly dispose of used batteries immediately.

Remove the keypad from the
handheld.

Carefully remove the batteries.

Caution:

You may need to use a

tool to remove the batteries as
they fit tightly in the unit. If you
use a tool, be careful not to
damage either the batteries or
the handheld.

Insert fresh batteries.

Ensure that the + side of each
battery faces away from the
display screen.

Replace the keypad.

Содержание NS/CLM/1L1/B - NSpire Math And Science Handheld Graphing Calculator

















































































































































Результаты поиска

Содержание NS/CLM/1L1/B - NSpire Math And Science Handheld Graphing Calculator

Отзывы:

Похожие инструкции для NS/CLM/1L1/B - NSpire Math And Science Handheld Graphing Calculator

Бренды по названию

Популярные бренды

Texas Instruments NS/CLM/1L1/B - NSpire Math And Science Handheld Graphing Calculator, Руководство пользователя

Результаты поиска

Содержание NS/CLM/1L1/B - NSpire Math And Science Handheld Graphing Calculator

Отзывы:

Похожие инструкции для NS/CLM/1L1/B - NSpire Math And Science Handheld Graphing Calculator

Бренды по названию

Популярные бренды