Texas Instruments Jacinto7, Руководство пользователя

Страница: 8 / 29

Figure 2-2. Jacinto7 Common Processor Component Identification
Because the Jacinto7 Common Processor board is used with different SOM boards featuring different Jacinto7
processors with different feature sets, some of the board’s peripherals/interfaces may not be supported.
2.1 Power Inputs
A power supply is not included with the EVM and must be purchased separately.
External Power Supply or Power Accessory Requirements:
• Output Voltage: 6.5 - 28 VDC
• Output Power Capacity: 100-120 W (depending on use case and connected peripherals)
• Efficiency Level V
Note
TI recommends using an external power supply or power accessory which complies with applicable
regional safety standards such as UL, CSA, VDE, CCC, PSE, etc.
2.2 Power Input [J7_CP] with LED for Status [LD2_CP][LD3_CP]
This EVM supports a wide input range of 6.5V to 28V. There is a DC Jack provided for power input. The
exact power required for the EVM is largely dependent on the application and connected peripherals. The
recommended supplies are listed in
Table 2-1 . There are many power supply manufacturers and models
available in the market, and it is not possible to test the EVM with every combination.
User Interfaces www.ti.com
8 Jacinto7 TDA4VE-Q1/TDA4VL-Q1/TDA4AL-Q1 Evaluation Module (EVM) SPRUJ69 – DECEMBER 2022
Submit Document Feedback
Copyright © 2022 Texas Instruments Incorporated