manualshive.com logo in svg

Texas Instruments Jacinto7, Руководство пользователя

Поделиться
Скачать
Texas Instruments Jacinto7 Скачать руководство пользователя страница 3

Trademarks

All trademarks are the property of their respective owners.

1 Introduction

The TDA4VE-Q1/TDA4VL-Q1/TDA4AL-Q1 EVM is a standalone test, development, and evaluation module 
which gives developers the basic resources to develop software and evaluate performance of the Jacinto7 
processor. The J721S2 is a super-set processor/device available in different configurations targeted for different 
markets and applications (TDA4VE-Q1, TDA4VL-Q1, and TDA4AL-Q1). This user’s guide describes the 
hardware, settings, and interfaces of the EVM.

1.1 Inside the Box

The TDA4VE-Q1/TDA4VL-Q1/TDA4AL-Q1 System on Module is not a stand-alone EVM and must be paired 
with a base board (such as Jacinto7 Common Processor Board). When paired the two-board system becomes 
the TDA4VE-Q1/TDA4VL-Q1/TDA4AL-Q1 EVM. This user guide discusses the EVM solution (System on 
Base Board).

The Jacinto7 TDA4VE-Q1/TDA4VL-Q1/TDA4AL-Q1 System on Module kit includes:

• System on Module mounted with J721S2 Super-set device
• Micro-SD Card
• HEX KEY L SHAPE 4MM 2.68"
• Paper Card with Start-up Link/Support Information

The Jacinto7 Common Processor Board (CPB) kit includes:

• Common Processor Board with mounted Quad Ethernet Adapter
• USB-A to USB micro-B Cable (2x)
• USB-A to USB-C Cable
• Ethernet Cable (2x)
• Display Port Cable
• 2.5mm Power Cable with Wire Leads

The orderable part numbers are provided in table below:

TDA4VE-Q1/TDA4VL-Q1/TDA4AL-Q1

System On Module

J721S2XSOMG01EVM

Jacinto7 Common Processor Board

J721EXCP01EVM

An EVM power supply is NOT included. For more information on the types of supplies recommended with the 
EVM, see 

Section 2.1

.

1.2 Key Features

Below are the EVM’s key features

• Processor:

– Texas Instruments Jacinto J721S2 Super-Set Processor

• Optimized Power Management Solution:

– Dynamic Voltage Scaling
– Multiple Clock and Power Domains
– Integrated Power Measurement

• Memory:

– 16GB LPDDR4 (4266 MT/s), support inline ECC
– Two 512Mb Non-Volatile NOR Memories, 1x Octal-SPI and 1x Quad-SPI
– 1Gb Non-Volatile NAND Memory, Octal-SPI
– 16GB Non-Volatile eMMC Memory, JEDEC/MMC v5.1 compliant
– MicroSD Card Cage Multimedia Card (MMC)/Secure Digital Card (Micro SD) Cage, UHS

‐

1

– I2C EEPROM, 1Mbit

• USB

www.ti.com

Trademarks

SPRUJ69 – DECEMBER 2022

Submit Document Feedback

Jacinto7 TDA4VE-Q1/TDA4VL-Q1/TDA4AL-Q1 Evaluation Module (EVM)

3

Copyright © 2022 Texas Instruments Incorporated

Содержание Jacinto7






























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды