Texas Instruments Jacinto7, Руководство пользователя

Страница: 16 / 29

Table 2-15. High Speed Camera Expansion Pin Definition [J52] (continued)
Pin # Pin Name Description Processor
Resource for [J52] Dir
18 GPIO2 GPIO0_26 / IO Expander 0x20 bit
P5 Bi-Dir
19 CSIa_D2_N CSI Port 0 / Port 2 Input
20 GPIO3 IO Expander 0x20 bit P3 / bit P6 Bi-Dir
21 CSIa_D3_P CSI Port 0 / Port 2 Input
22 GPIO4 GPIO0_28 / IO Expander 0x20 bit
P7 Bi-Dir
23 CSIa_D3_N CSI Port 0 / Port 2 Input
24 GND Ground
25 CSIb_CLK_P CSI Port 1 / Open Input
26 CSIb_D3_P CSI Port 1 / Open Input
27 CSIb_CLK_N CSI Port 1 / Open Input
28 CSIb_D3_N CSI Port 1 / Open Input
29 CSIb_D0_P CSI Port 1 / Open Input
30 Power Power, 3.3 V Output
31 CSIb_D0_N CSI Port 1 / Open Input
32 Power Power, 3.3 V Output
33 CSIb_D1_P CSI Port 1 / Open Input
34 Power Power, 3.3 V Output
35 CSIb_D1_N CSI Port 1 / Open Input
36 Power Power, 3.3 V Output
37 CSIb_D2_P CSI Port 1 / Open Input
38 Power Power, IO Level (1.8 V or 3.3 V) Output
39 CSIb_D2_N CSI Port 1 / Open Input
40 Power Power, IO Level (1.8 V or 3.3 V) Output
Note
In the DIR column, output is to the expansion module, input is from the expansion module. Bi-Dir
signals can be configured as either input or output.
2.5.4 Automation and Control Connector [J50_CP]
The EVM supports an interface to allow for automated control of the system, including functions like on/off, reset,
and boot mode settings.
Table 2-16. Test Automation Interface Pin Definition [J50]
Pin # Pin Name Description Dir
1 Power Power, 3.3 V Output
2 Power Power, 3.3 V Output
3 Power Power, 3.3 V Output
4-6 <open>
7 GND Ground
8-15 <open>
16 GND Ground
17-24 <open>
25 GND Ground
26 POWERDOWNz EVM Power Down Input
27 PORz EVM Power-On/Cold Reset
(MCU_PORz) Input
User Interfaces www.ti.com
16 Jacinto7 TDA4VE-Q1/TDA4VL-Q1/TDA4AL-Q1 Evaluation Module (EVM) SPRUJ69 – DECEMBER 2022
Submit Document Feedback
Copyright © 2022 Texas Instruments Incorporated