Texas Instruments GC5325, Руководство пользователя

Страница: 8 / 35

Using the Software
www.ti.com
4 Using the Software
4.1 Starting the GUI Software
To start the GC5325 GUI software installation, double click on the GC5325GUI_setup.exe file on the
provide CD.
When the Setup Wizard opens, click on "Next".
Read the License Agreement and click on "I accept the agreement".
Click on "Next".
The destination folder for the installed software is displayed. TI recommends using the default folder
location. All necessary folders will be created by the installation software.
Click on "Next".
Click on "Install" to start the installation.
After the installation is complete, click on "Finish".
If the default location was used, the software is now loaded under the directory called "C:\GC5325GUI".
Go to this folder and double click on the file called GC5325EVM.exe to start the GC5325 GUI.
The program usually takes about 15 seconds to start. Both a DOS window and a GUI appear. The DOS
window displays useful text during operation of the GUI, equivalent to the MATLAB Command window for
the uncompiled GUI. This looks as shown in
Figure 4 . The GUI looks as shown in Figure 5 .
Figure 4. DOS Window at Start-Up
8 GC5325 System Evaluation Kit SLWU063F – April 2009 – Revised April 2011
Submit Documentation Feedback
Copyright © 2009 – 2011, Texas Instruments Incorporated