Tuning Guide
6.4.3
Cannot Read Registers GUI Error
Sometimes when trying to "Set Default Register Values", the GUI will try to read the registers off of the
device and cannot do so. The GUI will then throw this error message.
Figure 21. Register Error Message
Click continue and try again to "Set Default Register Values". It should work the second time, if all of the
connections are correct from the Quick Start Guide in
. If not, just power cycle the EVM and
restart the GUI.
19
SLAU643 – July 2015
DRV10963 Evaluation Module
Copyright © 2015, Texas Instruments Incorporated
