Texas Instruments CBL 2, Руководство по началу работы

Страница: 117 / 124

© 2000, 2003 T
EXAS
I
NSTRUMENTS
I
NCORPORATED
G
ETTING
S
TARTED WITH THE
CBL 2™ S
YSTEM
B-7
databegin Results
0 Starts sending data at first point collected
1 to n Starts sending data at the point selected
dataend Results
0 Stops sending data at the last point
collected
1 to n Stops sending data at the point selected
Note: dataselect=0, 1, 2; filtered if Filter=1-6 in Command 3. dataselect=3, 4, 5; ignore filter
setting in Command 3. Data End must be greater than or equal to Data Begin (unless Data
End=0) and both must be less than or equal to the number of samples sent to the CBL 2™ in
the last Command 3.
Command 6 System Setup
{6, command }
command Results
0 Abort sampling
2 Abort sampling
3 Turns sampling sound off (default on
power-up)
4 Turns sampling sound on
{6, command,parm }
command Results
5
parm
number you specify Sets an ID number for the CBL 2 (used to
identify a specific CBL 2 when you have
multiple units linked together)
{6, command,filter }
command Results
6 Applies new filter to existing data
filter
0 to 6 the number of the new filter to be applied