Interface Details
13
SPRUIE6 – April 2017
Copyright © 2017, Texas Instruments Incorporated
AMIC110 Industrial Communications Engine (AMIC110 ICE)
shows the LED configuration on the AMIC110 ICE. To attain REACH compliance, the multicolor
LEDs were separated to three single LEDs. This shows the LED functionality but must be combined with a
lens or changed to a multicolor LED to comply with standards such as SERCOS-III, Ethernet/IP, and
Powerlink. The parallel resistors R188, R189, R235, and R236 are required for the boot-time configuration
of the PHY.
Figure 10. AMIC110 ICE Indicator LEDs
2.6
JTAG Emulation Circuit
The AMIC110 ICE supports a compact TI 20-pin connector in the design. An external emulator and
debugger pod, such as the
or the
, may be connected to the 20-pin connector for JTAG
connectivity. For more information on JTAG connections, see
.