• KB 20 CR
13
Radio playback
Select “Radio” as the source (see page 11). The CD
receiver is capable of receiving mono and stereo stations
in the frequency range from 87.5 to 108 MHz.
The name of the station is shown in the display panel for
stations with an RDS signal, and you can view the pro-
gram type and time by pushing the button
40
“Display”
(not all radio stations offer this service).
Setting the radio stations
Manually
With the buttons
29
“
” and
39
“
” you set the tuning
frequency: The frequency is increased or reduced by one
increment (0.05 MHz) each time the button is tipped.
Station scanning
You can start the scan by pushing the buttons
28
“
”
(up) and
30
“
” (down). The scan will stop once the fi rst
station with suffi cient reception is found.
Mono/stereo
Stations with a weak signal may result in sound interfer-
ence in stereo mode. Pushing the button
7
or
23
“Mode”
then switches to mono mode.
Station memory
Your radio can save up to 20 stations. You can conven-
iently select the stations with the push of a button later.
Saving stations
1. Set the desired station as described above.
2. Push the button
35
“PROG”. The message “PROG” will
blink in the display panel.
3. Push the button
37
“ALB +/–” to select the desired
memory slot number or enter it with the number buttons
34
“1 ... 0”. Enter the tens column with the button
36
“10+”.
4. Push the button
35
“PROG”. The station has now been
stored.
Selecting stations from the memory
• Push the button
37
“ALB +/–” to increase or decrease
the memory slot number.
• Enter the desired memory slot number with the number
keys
34
“1 ... 0”. Enter the tens column with the button
36
“10+”.
10
11
1
15
8
7
9
32
34
35
36
41
39
37
27
29
23
28
30
48
40
91886 GB 20111117.indd 13
91886 GB 20111117.indd 13
17.11.11 15:43
17.11.11 15:43
