• Impaq® 3000 Mk 2 Blu-ray
12
You will need two micro-type or AAA batteries with 1.5
Volt (included in the product contents) in order to operate
the remote control.
Inserting batteries
1. Push the clip of the battery compartment on the back
side of the remote control towards the arrow and then
remove the lid to the top.
2. If applicable, remove the old batteries (please follow
the notes on page 30).
3. Insert the batteries in the battery compartment as
shown in the fi gure.
4. Place the cover back on the compartment and push it
closed.
Functionality
The remote control relays the control signals by means
of infrared light. For this, you must point the front of the
remote control towards the receiver. Make sure that the
infrared light is not obstructed by objects.
Fluorescent lamps and energy saving lamps installed in
the direct vicinity may affect the functions of the remote
control or even impair them.
Remote control
