Tessonics RSWA, Руководство пользователя

Страница: 46 / 53

46 46
46 46
40
RSWA User’s Guide
Weld List
is shows the list of welds that are to be measured for this Part. An RSWA user can check the
welds in any order they like by selecting the weld they want to check from the list. Just like in
a Custom Inspection, a Part Inspection has Pass/Fail buttons to pass or fail the current weld
being measured. Instead of a New Weld button however, a Next Unit button is provided.
is lets you move to the next Inspection Order or repeat the same Inspection Order.
Starting a New Part Inspection
Press New Inspection, and in the window that pops up select Part and press next. A list of
parts that have been programmed into the RSWA is shown. Choose the part that you want
and press next. e next window asks you to name your Inspection, which is optional. If
there are any Inspection Orders defined for this part, a final window pops up showing a list
of Inspection Orders to choose from. Select one and press Finish. e window closes and
you can start checking welds.
Note: If no Inspection Orders have been defined, the RSWA simply shows all welds on
the selected part in alphabetical order.
Ending a Part Inspection
Pressing End Inspection anytime during a Part Inspection will save your Inspection to the
RSWA.
5.10.3 Opening Inspections
To open a saved inspection, click the Open Inspection button in the top le corner of the
screen. Doing so will launch the Open Inspection window shown in Figure 5.11.
is window helps you find the desired inspection by providing some filters and sorting.
Inspection Types: – Choose to only show inspections that are a certain type. Choose All
to show all Inspection types.
Operator – Choose to only show Inspections performed by the selected operator. Choose
All to show inspections from any operator.
Date Range – Choose either day, week or month. You will see the selection in the calendar
change to reflect the chosen option.