Tessonics RSWA, Руководство пользователя

Страница: 42 / 53

42 42
42 42
36
RSWA User’s Guide
Weld Name
Measurement Thumbnails
Reason
Decision
Figure 5.7 Array Explorer in a Custom Inspection
with the history of measurements taken for that weld. is history list can be used to
choose which measurement appears in the thumbnail; only the chosen measurement
will be saved. ere are two thumbnails because 3T stacks are supposed to be measured
from both sides, and these measurements should be paired together.
Decisions – Each weld can have an associated pass or fail. Either a checkmark for pass, a
cross for fail, or a dotted circle meaning no decision is shown.
Reasons – Shows the reason chosen for failing a weld. Can also show the reason for passing
a weld without measurement.
During an inspection, the Pass, Fail, and New Weld buttons appear in the bottom-le corner.
(Figure 5.8).