Tessonics RSWA, Руководство пользователя

Страница: 14 / 53

14 14
14 14
8
RSWA User’s Guide
operation is stored on the hard disk drive. e system does not respond to the pen or
other input. Refer to the “Resuming System Operation” section later in this chapter for
information on returning the system to the On mode.
Off Mode – All system functions are turned off to conserve power. e system does not
respond to the pen or other input. e system boots at the next system power-on.
Note:
e system consumes the same amount of power whether it is in Save-to-Disk
mode or Off mode.
Your system can be configured to enter some of these states automatically aer a period of
inactivity to conserve battery power.
2.3.4 Screen Protector
Using a screen protector will help insure that the screen remains as clear as possible. When
installed, the screen protector becomes a durable, replaceable surface that protects the dis-
play from abrasion.
Note: e tablet PC is not waterproof. Do not pour liquids on the system or wash it with
a wet cloth.
To install a new screen protector:
1. If a screen protector is already installed on the display screen, remove it before installing
the new screen protector. e screen protector is held onto the display screen surface by
a thin strip of adhesive around the edges. A notch in one corner of the screen protector
allows you to slide your fingernail under the screen protector for easy removal.
2. Clean the display by wiping the screen surface gently using a so cotton cloth dampened
with denatured alcohol. Ensure that all residues have been removed from the screen
before applying a new screen protector.
3. Remove the protective coating from the adhesive side of the screen protector first. Apply
the screen protector to the display screen surface. When doing so, orient the screen
protector with the adhesive side of the screen protector facing the display screen and the
notched corner of the screen protector toward the lower le corner of the display screen.
4. Apply pressure to the screen protector with your finger using a continuous wiping mo-
tion along the edges. e adhesive sets completely within 48 hours. To ensure a good