Before seating a child, ensure that the child
restraint system is securely installed. Grasp
the front of the child restraint system with
one hand on each side, and attempt to:
• Twist the child restraint system from side
to side.
• Pull the child restraint system away from
the seat.
If the child restraint system moves away from
the seat, both latches are not fully engaged
onto the seat's anchor bars. You must reinstall
it and try again. It is critical that both latches
on the child restraint system are fully
engaged.
WARNING:
Do not use ISOFIX/i-Size
anchors with child restraint system or
booster seats that have an integral
safety belt where the combined
weight of the child plus the child
restraint system exceeds 33 kg.
Attaching Upper Tether Straps
If an upper tether strap is provided, attach its
hook to the anchor point located on the back
of the rear seats.
NOTE:
The location of anchor points may not
be readily visible but can be found by
identifying a slice in the seat's material.
WARNING:
Tighten upper tether
straps according to the instructions
provided by the manufacturer of the
child safety seat.
WARNING:
USE ONLY SEAT BELT
RETAINED CHILD SAFETY SEATS IN
THE CENTER SEATING POSITION.
For dual-strap tethers, position a strap on
each side of the head support.
Always position single-strap tethers to run
over the top of the head support.
NOTE:
To prevent the single-strap tether from
moving side to side, the top of the head
support deforms.
Child Safety Seats
35
Seating and Safety Restraints