Tesla HV6410MX, Руководство пользователя

Страница: 12 / 64

12
ENG
WARNING!
Ensuring Adequate Ventilation
Make sure the ceramic hob is well ventilated and that air inlet and outlet are not blocked. In order to avoid accidental touch with
the overheating bottom of the hob, or getting unexpected electric shock during working, it is necessary to put a wooden insert,
fixed by screws, at a minimum distance of 50mm from the bottom of the hob. Follow the requirements below.
There are ventilation holes around outside of the hob. YOU MUST ensure these holes are not blocked by the
worktop when you put the hob into position.
The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force onto the controls protruding from
the hob.
Fix the hob on the work surface by screw four brackets on the bottom of hob (see picture) after installation.
Adjust the bracket position to suit for different work surface’s thickness.
• Be aware that the glue that joins the plastic or wooden material to the furniture, has to resist to temperature not
below 150ºC, to avoid the deforming.
• The rear wall, adjacent and surrounding surfaces must therefore be able to withstand a temperature of 90ºC.
Before locating the fixing brackets
A B C D
screw bracket Screw
hole
base
The brackets cannot touch with the inner surfaces of the worktop after installation under any circumstances (see
picture).
HOB
BRACKET BRACKET
HOB
TABLE TABLE