Tesla HV6410MX, Руководство пользователя

Страница: 6 / 64

6
ENG
How to use
Start cooking
Finish cooking
After power on, the buzzer beeps once, all the indicators light
up for 1 second then go out, indicating that the ceramic hob
has entered standby mode.
Touch the ON/OFF
all the indicators show “-“
control.
Place a suitable pan on the
cooking zone that you wish
to use.
• Make sure the bottom of
the pan and the surface
of the cooking zone are
clean and dry.
Touching the heating zone
selection control, and an
indicator next to the key
will flash.
Adjust heat setting by
touching the slider control.
• If you don’t choose a
heat setting within 1
minute, the ceramic hob
will automatically switch
off. You will need to start
again at step 1.
• You can modify the heat
setting at any time during
cooking.
• You can modify the
power level from 0 to 9
By the slide control.
Activate the Double zone
Press the heating zone
selection control of the
double loop heating zone
(e.g. power level is 6)
When the power level
indicator flash, then press
“ ”
After 5 seconds, the
indicator stop flash, the
double loop function
is activated, and power
level shows “6” and “=”
alternately.
Touching the heating zone
selection control that you
wish to switch off.
POWER UP
POWER DOWN
Beware of hot surfaces
“H” will show which cooking zone is hot to touch. It will
disappear when the surface has cooled down to a safe
temperature. It can also be used as an energy saving function
if you want to heat further pans, use the hotplate that is still
hot.
• The function only work in 1# and 3# cooking zone
• The dual cooking zone has two cooking areas that you can
use a central section and an outer section. You can use the
central section
(A) independently or both sections (B) at
once.
Using the Double zone function
Turn the cooking zone off by
touching the slider to “0”.
Make sure the display
shows”0”
Turn the whole cooktop off
by touching the ON/OFF
control.
Zone 1# Zone 3#