Tescom i-com Series, Инструкция по установке и эксплуатации, Страница: 6 / 23

- 2 -
2. Installation
2.1 Configuration Of The Modbus Communication Parameters
The device takes the device number during power on please select device number from 1 to 255 by setting
device number dip switches
Where
D
n
is the n
th
dip switch. For example, if we need to set the device’s address to 183 then we need
to set 7
th
, 5
th
, 4
th
, 2
nd
, 1
st
, and 0
th
dip switch pins. The address is calculated using above equation as
follows: