Tescom i-com Series, Инструкция по установке и эксплуатации, Страница: 22 / 23

- 18 -
ALARM AND STATUS GROUP BIT MEANING (STS PROTOCOL)
Addr Alarms BIT Description
15 Source-1 Voltage out of tolerant 7(128) 1=ALARM 0=NORMAL
15
Source-1 phase synchron not OK 6(64) 1=ALARM 0=NORMAL
15
Not used 5(32) 0
15
Source-1 Black Out 4(16) 1=ALARM 0=NORMAL
15
Source-1 Balance bad 3(8) 1=ALARM 0=NORMAL
15
Source-1 Frequency bad 2(4) 1=ALARM 0=NORMAL
15
Source-1 Input SW off 1(2) 1=OFF 0=NORMAL
15
Source-1 SCR alternance loss 0(1) 1=ALARM 0=NORMAL
16 Source-2 Voltage out of tolerant 7(128) 1=ALARM 0=NORMAL
16 Source-2 phase synchron not OK 6(64) 1=ALARM 0=NORMAL
16 Not used 5(32) 0
16 Source-2 Black Out 4(16) 1=ALARM 0=NORMAL
16 Source-2 Balance bad 3(8) 1=ALARM 0=NORMAL
16 Source-2 Frequency bad 2(4) 1=ALARM 0=NORMAL
16 Source-2 Input SW off 1(2) 1=OFF 0=NORMAL
16 Source-2 SCR alternance loss 0(1) 1=ALARM 0=NORMAL
17 SOURCE-1 Bad 7(128) 1=ALARM 0=NORMAL
17
SOURCE-2 Bad 6(64) 1=ALARM 0=NORMAL
17
Synchron BAD 5(32) 1=ALARM 0=NORMAL
17
Overload 4(16) 1=ALARM 0=NORMAL
17
Non synchron inhibit 3(8) 1=INHIBIT 0=NORMAL
17
Transfer inhibit 2(4) 1=INHIBIT 0=NORMAL
17
Over temperature 1(2) 1=ALARM 0=NORMAL
17
Performing transfer test 0(1) 1=PERMORMING 0=NORMAL
18 POWER SUPPLY-1 Failure 7(128) 1=ALARM 0=NORMAL
18
POWER SUPPLY-2 Failure 6(64) 1=ALARM 0=NORMAL
18
Output SCR alternance loss 5(32) 1=ALARM 0=NORMAL
18
SOURCE-1 manuel transfer 4(16) 1=TRANSFER 0=NORMAL
18
SOURCE-2 manuel transfer 3(8) 1=TRANSFER 0=NORMAL
18
SOURCE-1 maintenance by-pass 2(4) 1=ALARM 0=NORMAL
18
SOURCE-2 maintenance by-pass 1(2) 1=ALARM 0=NORMAL
18
Output Switch OFF 0(1) 1=OFF 0=NORMAL
19 Preferred SOURCE 7(128) 1=SOURCE-2 0=SOURCE-1
19 Output SOURCE 6(64) 1=SOURCE-2 0=SOURCE-1
19 LOGIN 5(32) 1=NOT LOGGED 0=SERVICE LOGIN
19 Sound 4(16) 1=OFF 0=ON
19 LOGIN 3(8) 1=NOT LOGGED 0=USER LOGIN
19 SOURCE-1 Input MCCB Trip 2(4) 1=ALARM 0=NORMAL
19 SOURCE-2 Input MCCB Trip 1(2) 1=ALARM 0=NORMAL
19 Not used 0(1) 0