Rear panel
SOUNDBOARD RIGHT (MONO): The sound signal is output in mono via this socket. The right
1.
stereo
2.
o jack.
em Exclusive and controller
soundboard with the
LOCAL OFF global setting. This is the typical application in conjunction with a sequencer.
4.
5.
6.
T – EDIT- WHEEL CNTL – EXP1 menu. Volume, modulation and filter effects are especially
suitable for use with expression pedals. As your AXON also supports NRPN/RPN (non-registered pa-
controllers, you can assign these pedals to the MIDI con-
8.
pre-programmed set of
10.
11.
able at this socket. To prevent hum
when using the synthesiser and original guitar signal at the same time, you should always route the origi-
nal guitar signal through the 13-pin cable and pick it up at this socket on the rear panel. The PU 100 and
AIX101/103 interface has an input for the pickup signal of your guitar. Use the cable provided to connect
the pickup output of your guitar to the input of the hexaphonic pickup.
channel will be available from the socket next to it (2) when in use.
SOUNDBOARD LEFT (STEREO): The signal is available in stereo from this socket when using a stereo
jack for the output. The left channel of the stereo signal is available here when using a mon
3. MIDI IN: The AXON receives Program Change commands, as well as Syst
data via this input. Alternatively, all incoming MIDI data can be sent directly to the
MIDI THRU: All data arriving at MIDI IN is available in unchanged form here.
MIDI OUT: All MIDI data generated by your AXON AX100 MKII are available here.
EXP. PEDALS, EXP1: An expression pedal may be connected here and assigned to a MIDI controller in
the PRESE
rameter number / registered parameter number)
trollers #6 or #38 for an extremely versatile range of applications unparalleled in any other device of this
category.
7. EXP. PEDALS, EXP2: Same function as EXP1
SWITCH PEDALS, CHAIN: A footswitch connected here lets you step through a
presets while in Chain mode.
9. SWITCH PEDALS, HOLD: Connect the included footswitch here to activate one of the programmed hold
modes such as COMMON, SEPARATE, LAYER, ARPEGGIATOR or CONTROL.
POWER: Connect the mains power adapter provided with the unit here.
GUITAR OUTPUT: The unmodified pickup signal of your guitar is avail
AXON AX 100 MKII V. 2.0 (English)
13