Step
(1-32)
Use the VALUE +/- buttons to select the current step within the chain. The preset assigned to the step is
shown at the left. To insert a preset step into an existing chain, simply press STORE at the insertion point.
This will insert a further step into the chain and move all subsequent steps to the rear by one step. You can
e program or preset number for the step. By default, the inserted step has the same values as
ou can also delete existing preset steps from the chain. Select the number
of the step you would like to delete and press the EDIT button. The current step will be removed and all follow-
ing steps will be moved forward.
button to exit Chain mode. Whenever you edit any values, a line of the display will flash to
press the EXIT button.
now specify th
the previous step in this location. Y
Storing Chain Presets
Press the EXIT
indicate that the changes have not been saved. Press the STORE button. Choose the location (1-32) at which
you would like to store the changes. Pressing the ENTER button will save the changes to the current, edited
location. You can choose a different location, however. In this way you can copy Chain presets in which you
only intend to make minor changes. To exit without saving your changes, simply
This programming step is also much easier in the Software Editor, due to the more clearly arranged display:
50
AXON AX 100 MKII V. 2.0 (English)