2
3. External view
Rear view
Front view
Figure 1. External view of the streamer.
1 – DC IN – DC powering entry for 3.5/1.3 mm DC jack;
2 – Reset – device reset and restore defaults button (see description at section 6);
3 – IR OUT – 3.5 mm socket for attachable infrared blaster jack which sends commands to the STB;
4 – 10/100Mb ETH – IPTV and WEB control interface. RJ45 socket;
5 – USB – USB connector for video records storage. USB-A socket;
6 – HDMI OUT – HDMI video output connector for input signal pass-through distribution;
7 – HDMI IN – HDMI video input connector for receiving video signal;
8 – device status indication light and IR receiver sensor for virtual remote controller learning function;
4. Installation instructions
Read the safety instructions first.
Connect the Set Top Box HDMI video output to the device HDMI IN connector using HDMI cable.
If required, connect device HDMI OUT video output to the TV HDMI video input by using HDMI cable.
Connect IR blaster to the device IR socket and point its head to the STB front panel. Use a sticky mounting
pad included in the IR blaster package if required.
Plug Ethernet cable and connect to the home router or personal computer.
Connect the device power supply to the device DC-IN connection and plug the power supply to the mains.
4.1 WEB browser requirements
Streamer supports the following WEB browsers:
• Chrome starting from version 66
• Opera starting from version 53
1
2
3
4
5
6
7
8
