Termozeta 8028153111291, Инструкция по эксплуатации

Страница: 53 / 60

6. MEMORY
At the end of a measurement, this blood pressure monitor automatically stores the
measurement result with date and time. The memory has a capacity of 120
measurements for each of the two users, for a total of 240 measurements (Users
A and B).
6.1 View stored results
With the unit turned off, briefly press (about half a second) the MEM button (if you
hold it down for longer, the unit will remain off). The display first shows the
average of all measurements relevant to the currently selected user; that is, the
average of all systolic, diastolic and heart rate pressures stored in memory for
currently selected user A or B.
In this condition the
M
(15) and
AVG
(6) symbols are displayed .
By briefly pressing the MEM button, the AVG indicator (6) goes off, the display
shows the memory number indicator (9) for about one second and the display (4)
shows the memory number displayed starting from 1 , after which the display
shows the systolic, diastolic and heart rate values contained in that memory
location.
NOTE: Memory record n ° 1 is the last measurement made in order of time.
By briefly pressing (0.5 ”) MEM , you go to memory record no. 2 and so on until
the first recording and then return to memory record no. 1.
To exit, briefly press the
START/STOP button (if you keep START/STOP pressed
for longer, nothing happens).
6.2 Memory reset
To delete the data recorded in the internal memory of the blood pressure monitor,
select the desired user and
press the MEM button for more than 5 seconds .
Changing the batteries or turning off the device DOES NOT delete user
memories.
WARNING! : By holding MEM for more than five seconds, the
memory of the selected user is permanently deleted!
NOTE:
We suggest you do not delete all measurement records from monitor
memory at once, if you decide to delete all records, keep records in another way,
in case you need to consult them later. Removing the battery does not result in
the loss of recordings.
53