TERMA WEBL1K906F, Руководство пользователя

Страница: 58 / 80

58
PRESENCE DETECTION, ENERGY SAVINGS
IMPORTANT INFORMATION DETECTION
OF PRESENCE
The presence detector is sensitive to temperature variations
and light. It is likely to be disturbed by the following items:
— Hot or cold sources such as forced air vents, lights, air
conditioners.
— Reflective surfaces such as mirrors.
— Animal crossing in the detection area.
— Objects moving with the wind like curtains and plants.
Disable the presence detection if your device was installed
near one of these.
To disable the presence detection, see page 65 .
Note: the detection range varies depending on the am-
bient temperature.
OVERVIEW
The device fits your lifestyle while keeping your power
consumption under control.
With its front infrared sensor, the device smartly optimizes
the management of heating : it detects movement in the
room where it is installed and in case of absence, auto-
matically performs a progressive lowering of the setting
temperature resulting in: energy savings. To ensure proper
operation, do not block the sensor’s field of view by any
obstacle (curtains, furnitures...).
Lowering the temperature in the absence of people
Unoccupied periods*
Value of lowering setting
temperature*
20 minutes Comfort -1°C
40 minutes Comfort -1,5°C
1 hour Comfort -2°C
72 hours Frost protection
* Unchangeable factory settings
Note: when presence is detected in the room, the device
automatically returns to the initial mode.
Remarks: By default, when the sensor is enabled and
detects movement in the room, the display lights up for
a few seconds then switches off. To change the backlight
see page 61 , backlight setting.
OPERATION
20 min.
40 min. 1 hr 72 hr
19°C
18°C
17,5°C
17°C
7°C
7°C
Time
Se�ng
temperature
19°C
-2°C
17°C
-1,5°C
17,5°C
-1°C
18°C
Presence detected Presence not detected
SENSOR ANGLE OF VIEW
Top view
65° 65°
Active area
Inactive area
Side view
30°