68
③
Press
to confirm. The new code is now saved.
④
Press again on
to exit setting PIN code mode and
go back to the home display of the installer settings.
To exit the Installer settings, press
twice.
RESTORING FACTORY SETTINGS
If the PIN code protection is disabled, the user and installer
settings are re-initialized:
①
From the PIN code setting, press
.
rest
appears
briefly on the display.
②
NO
appears. Press
or
to select
YES
.
yes
= Factory settings reset
NO
= Factory settings not reset
③
Press the key
for 5 seconds. The device returns
to its initial configuration and goes back automatically
to the home display of the installer settings.
5 sec.
The following parameter values will be effective:
Settings
Factory settings
Operation
Comfort setting temperature
19°C
Boost duration
60 min.
Keypad lock
Disabled
User settings
Backlighting
L3
Eco mode temperature lowering-level -3,5°C
Frost protection temperature
7°C
Super Comfort
Enabled
Minimum set of Comfort setting
temperature
7°C
Maximum set of Comfort setting
temperature
30°C
Maximal Boost duration
60 min.
Maximum ambient temperature for
the automatic stop of the Boost
35°C
Temperature unit
°C
Installer settings
Automatic open window detection
Enabled
Presence detection
Enabled
Dual optimization feature
Opti comfort
PIN code protection
Disabled
Value of the PIN code
0000
To exit the Installer settings, press
twice.
Содержание WEBL1K906F
Страница 41: ...41 EN ...
Страница 78: ......
Страница 79: ......
Страница 80: ...TERMA Sp z o o Czaple 100 80 298 Gdańsk Poland terma termagroup pl www termagroup pl 20200529WOLKA MPGKE 385 ...