Terex PT100G Forestry, Руководство по обслуживанию

Страница: 60 / 142

17.
Disconnect the pilot and case drain tubes from the
hydraulic tank. Disconnect the other ends of tubes;
pilot tube from the loader valve and the case drain
from the 10 micron hydraulic filter. Remove the
tubes from the machine (fig. 9-13).
Note:
If there is anything else that is routed behind the
auxiliary hydraulic tubes that will prevent them from
being removed, disconnect or carefully remove these
items at this time to allow the tubes to be removed.
18.
Remove the hydraulic oil fill tube and other
hoses from the top of the tank on each side
(fig. 9-14).
19.
Disconnect the lower hoses on the back of the
tank on each side (fig 9-15).
20.
Remove the hose clamp on rear, the right side of
the chassis and remove the bolts that secure the
hydraulic tank to the chassis (fig 9-16).
21.
Make sure that there is nothing that would visibly
prevent the reservoir from being removed, or is
still attached to other components within the
machine, then proceed with step 22.
9-4
9-14
9-16
9-17
Compact Track Loader
9. Hydraulic Reservoir
9-13
Tubes
9-15
Bolt
Fuel Hose clamp
bolt