Terex PT100G Forestry, Руководство по обслуживанию

Страница: 45 / 142

Side Panels
Removal
1.
Remove the fasteners securing the forward portion
of the side panel to the cab enclosure (fig. 6-6).
2.
Pull the side panel away from the cab as shown,
then remove it from the machine (fig. 6-7).
3.
Remove the fasteners securing the rear portion of
the side panel to the cab enclosure (fig. 6-8).
4.
If removing the left side panel, disconnect the 12v
power outlet, then remove the panel from the
machine (fig. 6-9).
Installation
1.
To install the side panels, reverse the removal
procedure.
Pillar Harness Panels
Removal
1
. Remove the fasteners securing the pillar panel
to the cab enclosure (fig. 6-10).
2.
Pivot the panel away from the cab to expose the
wire harness. (Disconnect alarm if removing the
left pillar harness panel) (fig. 6-11).
Installation
1.
To install the pillar panels, reverse the removal
procedure.
6-3
Compact Track Loader
6. Operator Enclosure
6-9
6-6
Required Tools
Phillips Type Screwdriver
6-7
6-10
6-11
6-8
Power Outlet