Terex PT100G Forestry, Руководство по обслуживанию

Страница: 108 / 142

Drive Pump
(Drive Relief Valves)
Removal & Adjustment
1.
Make sure the machine isoff and cool and with
hydraulic actuators are relaxed.
2.
Remove the drive pressure relief valves as shown
in (fig.16-25, 16-26)
3.
If adjustment is needed (see drive pressure check
procedure in section 17), loosen the allen type set
screw on the valve
(fig. 16-27)
.
4.
Flip the valve over, then tighten the nut to increase
the pressure setting (CW) or loosen it to decrease
the pressure setting (CCW)
(fig. 16-28)
.
Drive Pump Solenoid/Spool
Disassembly
1.
Make sure the machine isoff and cool and with
hydraulic actuators are relaxed.
2.
Remove the nut securing solenoid in place. (fig.
16-29)
3.
Remove solenoid from spool. (fig. 16-30)
16-28
16-6
Required Tools
Allen Wrench/Socket
Combination/Socket wrench
16-25
16-26
16-27
16-29
16-30
Required Tools
Combination/Socket wrench
Compact Track Loader
16. Hydraulic Component Service