![background image](http://html.mh-extra.com/html/terex/genie-sx-135-xc/genie-sx-135-xc_service-and-repair-manual_1088691088.webp)
Service and Repair Manual
October 2016
Ground Controls
78
SX-135 XC
Part No. 1263382
2 Turn and hold the bypass/recovery key switch
to the recovery position. The switch must be
held in the recovery position.
Result: The auxiliary power unit will turn on
and the boom will begin the following recovery
sequence.
•
The primary boom will retract.
•
The primary boom will lower.
Note: The key switch must be held in the recovery
position until the recovery sequence is complete or
until the operator in the platform can safely exit the
platform.
Note: If any boom safety limit switches are faulty,
the boom will only retract and not lower and the
operator will need to be recovered from that point.
Note: If the Recovery function has been used, this
may indicate there may be faults with the machine.
Tag and remove the machine from service until the
fault has been corrected by trained personnel.
6-2
Circuit Boards
The ground control box contains a replaceable
membrane decal with touch sensitive buttons for
various machine functions. The ground control box
also contains two printed circuit boards:
The LCD (Liquid Crystal Display) circuit board
is mounted to the inside of the control box lid which
controls the LCD display screen.
The ECM circuit board
is the main circuit board
for the machine. All operating parameters and
configuration of options for the machine are stored
in the ECM memory.
Note: When the ECM circuit board is replaced, the
joysticks will need to be calibrated. Refer to Repair
Procedure,
How to Calibrate a Joystick.
Note: When the ECM circuit board is replaced, all
the boom, platform and axle angle sensors will
need to be calibrated and in a specific order.
Contact Genie Product Support.
How to Remove the LCD Display
Screen Circuit Board
1 Push in the red Emergency Stop button to the
off position at both the ground and platform
controls.
2 Remove the ground control box lid fasteners.
3 Open the ground control box.
Electrocution/burn hazard.
Contact with electrically charged
circuits could result in death or
serious injury. Remove all rings,
watches and other jewelry.
Содержание Genie SX-135 XC
