Rear Interior Panel
Removal
1.
Remove the screws holding the rear panel to the
cab. (fig. 6-26)
2.
Disconnect the rear power point from the harness,
then remove the panel from the cab. (fig. 6-27)
Installation
1.
To re-install the rear interior panel, reverse the
removal procedure.
Lap Bar Gas Spring
Removal
1.
Remove the right, left and rear interior panels from
the cab to access the gas spring.
2.
Put the lap bar in the raised position to relieve ten-
sion on the lap bar gas spring. (fig. 6-28)
3.
Using a small screwdriver, remove the retaining
clip from each end of the gas spring. (fig. 6-29)
4.
Remove the gas spring by pulling both ends off of
the ball joints.
Installation
1.
Reverse the removal procedure to reinstall the lap
bar gas spring.
6-6
Rubber Track Loader
6. Operator Enclosure
Required Tools
Phillips Type Screwdriver
6-26
6-27
6-28
Required Tools
Phillips & Blade Type Screwdrivers
6-29
https://tractormanualz.com/
Содержание ASV SR70
