VEEK-MT-SoCKit User Manual
March 17, 2014
3
Configuration Sources
o
Quad Serial Configuration device – EPCQ256 for FPGA
o
Onboard USB-Blaster II Controller
Memory Devices
o
1GB (2x256MBx16) DDR3 SDRAM for FPGA
o
1GB (2x256MBx16) DDR3 SDRAM for HPS
o
128MB QSPI Flash for HPS
o
MicroSD Card Socket for HPS
Communication
o
USB 2.0 OTG (ULPI interface with micro USB type AB connector)
o
USB to UART (micro USB type B connector)
o
10/100/1000 Ethernet
Connectors
o
One HSMC (8-channel transceivers, configurable I/O standards 1.5/1.8/2.5/3.3V)
o
One LTC connector (One Serial Peripheral Interface (SPI) Master, one I2C, and one GPIO
interface)
Display
o
24-bit VGA DAC
o
128x64 dots LCD Module with backlight
Audio
o
24-bit CODEC, Line-in, Line-out, and Microphone-in jacks
Switches, Buttons and LEDs
o
8 User Keys (FPGA x4 ; HPS x 4)
o
8 User Switches (FPGA x4 ; HPS x 4)
o
8 User LEDs (FPGA x4 ; HPS x 4)
o
2 HPS Reset Buttons (HPS_RSET_n and HPS_WARM_RST_n)
Sensor
o
G-sensor for HPS
o
Temperature Sensor for FPGA
Power
o
12V DC Input