VEEK-MT-SoCKit User Manual
March 17, 2014
30
Batch file: VIP_Camera.bat, VIP_Camera _bashrc
FPGA configuration file: SoCKit_VIP_Camera.sof
Nios II program: VIP_Camera.elf
Demonstration Setup
Connect the VGA output of the SoCKit board to a VGA monitor, as shown in
(both LCD and CRT type of monitors should work)
Configure the FPGA by executing the batch file “VIP_Camera.bat” from the folder
“System-CD\Demonstrations\FPGA\SoCKit_VIP_Camera\demo_batch”. (note *)
The system enters the FREE RUN mode automatically. Press
KEY0
on the SoCKit board to
reset the circuit
Press
KEY2
to stop run; press
KEY3
again to switch back to FREE RUN mode and you
should be able to see whatever the camera captures on the VGA display
User can use
SW3
to mirror lines of the image. Please remember to press
KEY0
to reset the
circuit after
SW3
is toggled.
In the touch-screen, press and drag the video frame box will result in scaling the playing
window to any size, as shown in
Note:
(1) Execute SoCKit_VIP_Camera\demo_batch\VIP_Camera.bat will download .sof and .elf files.
(2) You may need additional Altera VIP suite Megacore license features to recompile the project.
Figure 4-10 Setup for the VEEK VIP camera demonstration