Teral SJ4S, Инструкция по эксплуатации

Страница: 5 / 24

2-1
１.２.２ Safety instructions for installation，maintenance and inspection
（1）Installation，maintenance and inspection of the pump should be performed by
personnel who have been trained in its operation and use．
Electrical wiring work should be performed only by suitably qualified personnel or
electricians．
（2）Backup pump have to be prepared if the occupation is very important and possible cause
heavy trouble when suspension of water supply.
（3）Before carrying out maintenance or inspection of the pump，be sure to inform all
relevant personnel．
（4）Before carrying out maintenance or inspection of the pump, stop the pump and turn
off the main power supply to the operation panel．
If you carry out the work with the power turned on，there is danger of electric
shock，and the pump could start up suddenly，causing injury．
Be sure to install an electrical leakage breaker on the power supply side．
（5）Turn off pump and cut off electric power, call the shop or the pointed server by maker
if something wrong with the pump. Running the abnormal pump will cause electrocute, fire
or trouble.
（6）Do not water motor. It will cause short-circuit and lower insulation and get damage.
（7）After the power is turned on，touch only those parts of the pump that you have to
touch in order to operate it．In particular，do not touch the electrical circuits，
or you could be electrocuted．Be sure to fit the cover over the motor terminal box．
１.３ Location of warning label
The location of the warning label is shown in the drawing below．
If the label becomes dirty or illegible，or starts to peel off，etc.，replace it
with a new one．
1 - 2
Follow ALL instructions in warnings affixed to the pump and written in
this manual．