The controller supports only one active session – only one user (administrator) can operate
the device. If another user tries to login, the following message appears: “Someone’s logged in”
The active session will be terminated automatically, if the current user stays inactive for 2
minutes.
7.2
Monitoring page
After successful authorization, the Monitoring page appears:
The Monitoring page provides information about the state of the digital and analog inputs,
relay state and the temperature (if temperature sensor is connected to the controller) .
7.3
I/O setup page
The input and output settings are made in “I/O Setup” page. The following parameters can
be set :
•
Description
– brief description of the output, maximum 11 characters should be used.
•
Pulse Duration
– time for which the relay changes its state, by pushing the "Pulse" button
on "Monitoring" page.
•
ICMP Mode
– this is an operational mode, in which the controller restarts the relay
output, if no ICMP echo-request (ping) is received from specified IP Address for
specified time (Ping timeout for restart ) .
•
Ping time out for restart
– timeout for restart for
Relay 1
.
•
IP address -
IP address of the host from which ping is expected.
