8.7
accounts
OID
Name
Access
Description
Syntax
x
.7.1.1.0
adminName
read-write Username (Admin)
String (SIZE (0..14))
x
.7.1.2.0
adminPassword
read-write Password (Admin)
String (SIZE (0..14))
x
.7.2.1.0
userName
read-write Username (User)
String (SIZE (0..14))
x
.7.2.2.0
userPassword
read-write Password (User)
String (SIZE (0..14))
8.8
Save changes
OID
Name
Access
Description
Syntax
x
.8.0
configurationSaved
read-write Save configuration changes
INTEGER { SAVED(1), UNSAVED(0) }
x
.9.0
restartDevice
read-write Restart device
INTEGER { RESTART(1), CANCEL(0) }
9.
Restoring Factory Default Settings
If the IP address or password are forgotten,
TCW110
can be restored to its original
factory default settings. To do this, please follow the steps below:
-
remove the power supply from the unit and open the plastic box
-
press and hold the RESET button then turn on the power supply
-
The leds POWER and BUSY are flashing 12 times, after that they will turn on. In this
moment the RESET button should be released. The factory default settings are
shown in the table below:
User Name (Admin)
admin
Password (Admin)
admin
User Name (User)
user
Password (User)
user
IP Address
192.168.1.2
Subnet Mask
255.255.255.0
Default Gateway
192.168.1.1
SNMPConfiguration
enabled
readCommunity
public
writeCommunity
private
