TEPLOSTAR Binar-5B-Compact, Руководство пользователя

Страница: 51 / 74

ENG Binar-5B/5D-Compact
After setting the time of lighting of indicator press the middle knob to come back to
the mode display the current time (figure 6.7.)
Figure 6.7 current time
6.1.3 Viewing the coolant temperature, voltage and the version number the
installed program
When the indicator is displayed the current time, working of heater or working of
heater pump, briefly pressing the right button displayed on the indicator value of the
coolant temperature at the outlet of the heater. In the first digits of the display will show
the sign L, the second digit sign « — » (minus), if the temperature is negative, and 3, and
4 bits value of the temperature in degrees Celsius (figure 6.8).
Figure 6.8 temperature of coolant
The next short press the right button displayed on the display supply voltage. In the
first digits of the display will show the sign of U in the 2, 3 and 4 digit numeric value of
the supply voltage. In the fourth digit shows tenths of a volt (figure 6.8a).
Figure 6.8a supply voltage (12,5V)
The next short press the right button on the remote control returns to the display
mode «current time».
In a short press on the left button from the display mode «coolant temperature» or
«power supply» on the display will show the version number of program installed in the
electronic unit (figure 6.9).
Figure 6.9 program version number
From this mode, you can return to the temperature display by pressing the left or right
button or call the choice of pump installed, clicking the middle button.
14