TEPLOSTAR Binar-5B-Compact, Руководство пользователя

Страница: 48 / 74

Binar-5B/5D-Compact ENG
5 Pre-heater control un it
Control unit operates the activity of the pre- heater according to the set program and
fulfill the following functions:
a) pre-heater starting and switching off according to control panel or other control
devices (modem, remote control device) command;
b) pre-heater basic components diagnostics before and during the operation;
c) pre-heater work control and choice of the pre-heater operation mode according
to the temperature of the cooling liquid;
d) connection with control devices, identification of active device and information
transmission;
e) pre-heater switching off:
- when operation cycle is finished;
- when one of the controlled basic components failed;
- when the parameters are out off tolerable limits (temperature, voltage,
flame blow off in combustion chamber).
6 The pre-heater control devices (according to the choice of the consumer).
6.1 Control panel with timer
6.1.1 Control panel controls the heater
On the surface of the timer there are: four-digit LED indicator, four LEDs - three on
the left (lower, middle, upper) and one on the right and three buttons (left, middle, right).
Location of digits, LEDs and buttons shown in figure 6.1.
LEDs
Lower
у
Middle knob
Figure 6.1-Control panel
11