25
Keep batteries out of the reach of small
children.
Caution
NEVER attempt to
recharge an alkaline battery.
Risk of explosion.
Caution
Do not mix old, new or
different types of batteries as
this may lead to battery leakage or low
battery indication.
Disposal: Always dispose of batteries
responsibly
according
to
local
government guidelines. Do not throw
batteries onto a fire. Risk of explosion.
12.2. CONNECTING LEAD
WIRES
Insert the lead wire plug into the base of
the unit.
Attaching the electrode pads to the
lead wire.
Push the pin ends firmly into the pigtail
ends of the electrode pads.
The lead wires may be damaged by
rough handling, and should be treated
with care.
Lead wire colour coding.
The ends of the lead wires are coloured
red or black. One of the electrode pads
should be positioned over the motor
point (see 9.3.).
12.3. PREPARING FOR
SESSION
1) Before use make sure your skin is
clean and dry.
2) Place the electrode pads on the skin,
see section 9.
3) If you are using your
perfect EMS
while moving, you can attach the unit
to your belt using the belt clip or hang
it around your neck using a neck cord
(not included). For safety, use thread
or wool that will snap easily if the unit
snags on something.
4) You can safely lean on the electrode
pads. The sensation might change.
Warning:
Ensure the
perfect
EMS
is switched OFF before
applying the electrode pads on the skin.
12.4. TRAINING SESSION
1) Press and hold the
ON
button on the
control unit for 3 to 5 seconds to
switch the control unit on.
2) When switched on for the first time,
the
perfect EMS
will automatically
select the programme
A
. Next time,
it will automatically select the
programme you were using the last
time it was switched off.
3) You can select from the 10
programmes (6 preset and 4 manual
programmes). Details in section 8
will help you identify the best
programme to suit you.