Tennant T380AMR Скачать руководство пользователя страница 8

Страница: 8 / 88

T380AMR 9020999 (08-2020)

SAFETY

When servicing machine (continued)

- Wear personal protective equipment as

needed and where recommended in this
manual.

For Safety: wear hearing protection.

For Safety: wear protective gloves.

For Safety: wear eye protection.

For Safety: wear protective dust mask.

7. When loading/unloading machine onto/off truck

or trailer:

- Use ramp, truck or trailer that will support

the weight of the machine and operator.

- Drain tanks before loading machine.
- Do not drive on a slippery ramp.
- Use caution when operating on a ramp.
- Do not load/unload on ramp inclines that

exceed 15.8% / 9° grade.

- Lower scrub head and squeegee before

tying down machine.

- Turn off machine and remove key.
- Block machine tires.
- Use tie-down straps to secure machine.

Содержание T380AMR

























































































Результаты поиска

Содержание T380AMR

Отзывы:

Похожие инструкции для T380AMR

Бренды по названию

Популярные бренды

Tennant T380AMR, Руководство оператора

Результаты поиска

Содержание T380AMR

Отзывы:

Похожие инструкции для T380AMR

Бренды по названию

Популярные бренды