Tennant T380AMR Скачать руководство пользователя страница 6

Страница: 6 / 88

T380AMR 9020999 (08-2020)

SAFETY

The following precautions are used throughout this
manual as indicated in their descriptions:

WARNING: To warn of hazards or
unsafe practices that could result in
severe personal injury or death.

FOR SAFETY: To identify actions that must be
followed for safe operation of equipment.

The following information signals potentially
dangerous conditions to the operator. Know
when these conditions can exist. Locate all safety
devices on the machine. Report machine damage
or faulty operation immediately.

WARNING: Batteries emit hydrogen
gas. Explosion or

re can result. Keep

sparks and open

ame away. Keep

covers open when charging.

WARNING: Flammable materials can
cause an explosion or

re. Do not use

ammable materials in tank(s).

WARNING: Flammable materials or
reactive metals can cause an explosion
or

re. Do not pick up.

WARNING: Spinning brush. Keep hands
away.

WARNING: Magnetic Field Hazard.
Magnetic pad driver/brush can be
harmful to those with pacemakers or
medical implants.

This machine is equipped with technology
that automatically communicates over the
cellular network. This machine is equipped
with BrainOS software that is accessible via
the BrainOS User Interface (UI) Touch Screen.

Avoid operating machine in areas where
other equipment that may be sensitive to
electromagnetic noise is located.

FOR SAFETY:

1. Do not operate machine:

- Unless trained and authorized.

- Unless operator manual is read and

understood.

- Under the in

uence of alcohol or drugs.

- In Manual Mode: While using a cell phone or

other types of electronic devices.

- Unless mentally and physically capable of

following machine instructions.

- With brake disabled.

- Without

lters in place or with clogged

lters.

- If it is not in proper operating condition.

- In areas where

ammable vapors/liquids or

combustible dusts are present.

- In outdoor areas. This machine is for indoor

use only.

- In areas that are too dark to safely see the

controls or operate the machine.

- In areas with possible falling objects.

- With pads or accessories not supplied or

approved by Tennant. The use of other pads
may impair safety.

2. Before Starting Machine:

- Check machine for

uid leaks.

- Make sure all safety devices are in place

and operate properly.

- Check brakes and steering for proper

operation.

- In Manual Mode: Adjust seat and fasten seat

belt (if equipped).

3. When using machine in manual mode:

- Use only as described in this manual.

- Use brakes to stop machine.

- Reduce speed when turning.

- Go slowly on inclines and slippery surfaces.

- Do not scrub on ramp inclines that exceed

7% / 4° grade or transport (GVWR) on ramp
inclines that exceed 10.5% / 6° grade.

- Drive slowly through doorways and narrow

openings.

- Be cautious of the squeegee near

bystanders and obstacles.

- Keep all parts of body inside operator station

while machine is moving.

- Always be aware of surroundings while

operating machine.

- Use care when reversing machine.

- Keep children and unauthorized persons

away from machine.

- Do not allow machine to be used as a toy.

- Do not carry passengers on any part of the

machine.

- Always follow safety and traf

c rules.

- Report machine damage or faulty operation

immediately.

- Follow mixing, handling and disposal

instructions on chemical containers.

- Place proper

oor cleaning signage in areas

where the machine is operating and people
are present, in accordance with standard

oor cleaning practices.

- Follow site safety guidelines concerning wet

oors.

IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS

Содержание T380AMR

























































































Результаты поиска

Содержание T380AMR

Отзывы:

Похожие инструкции для T380AMR

Бренды по названию

Популярные бренды

Tennant T380AMR, Руководство оператора

Результаты поиска

Содержание T380AMR

Отзывы:

Похожие инструкции для T380AMR

Бренды по названию

Популярные бренды