Tennant T380AMR Скачать руководство пользователя страница 72

Страница: 72 / 88

T380AMR 9020999 (08-2020)

MAINTENANCE

SCRUB BRUSHES AND PADS

Check scrub brushes daily for wire or string
tangled around the brush or brush drive hub. Also
check brushes for damage and wear.

Replace the pads when they no longer clean
effectively. Replaces the brushes when they no
longer clean effectively or when the bristles are
worn to the yellow indicator.

Cleaning pads must be placed on pad drivers
before they are ready to use. The cleaning pad is
held in place by a pad holder.

Cleaning pads need to be cleaned immediately
after use with soap and water. Do not wash the
pads with a pressure washer. Hang pads, or lie
pads

at to dry.

NOTE: Always replace brushes and pads in
sets. Otherwise one brush or pad will clean more
aggressively than the other.

REPLACING THE BRUSH OR PAD DRIVER

1. Stop machine on a level surface. Make sure

the scrub head is in the raised position.

2. Turn the machine

ON/OFF key switch

off.

FOR SAFETY: Before leaving or servicing
machine, stop on level surface, turn off
machine, and remove key.

3. Pull the brush release handle to release the

brush from the scrub head.

4. Remove the brush/pad driver from under the

scrub head.

5. Push the new brush or pad driver under the

scrub head and lift the brush or pad driver until
the magnet secures the brush or pad to the
drive hub.

WARNING: Magnetic Field Hazard.
Magnetic pad driver/brush can be
harmful to those with pacemakers or
medical implants.

6. Ensure the brush or pad driver is securely

mounted on the brush drive hub.

Содержание T380AMR

























































































Результаты поиска

Содержание T380AMR

Отзывы:

Похожие инструкции для T380AMR

Бренды по названию

Популярные бренды

Tennant T380AMR, Руководство оператора

Результаты поиска

Содержание T380AMR

Отзывы:

Похожие инструкции для T380AMR

Бренды по названию

Популярные бренды