MAINTENANCE
57
EZ Rider 330730 (9--00)
ADJUSTING THE SQUEEGEE GUIDE ROLLER
The squeegee guide rollers are located on both
ends of the rear squeege. The rollers guide the
squeegee blade end along a wall. Loosen the nut
at the top of the guide roller and move the roller in
or out to adjust how close the end of the
squeegee blade is to the wall. The squeegee
blade end should be further away from the wall
when the floor curves up into the wall.
REAR SQUEEGEE BLADES
The rear squeegee has two squeegee blades, the
front and rear. Each blade has four wiping edges.
To use them all, start with one wiping edge. To
use the next wiping edge, rotate the blade
end-for-end. To use the next wiping edge, rotate
the top edges down, bottom edges up. To use the
last edge, rotate the blade end-for-end. Rotate
squeegee blades when they become worn
half--way through the thickness of the blade.
Replace damaged squeegee blades.
REPLACING OR ROTATING THE REAR
SQUEEGEE BLADE
1. Make sure the squeegee is raised off the
floor.
2. Turn the machine power off and set the
parking brake.
FOR SAFETY: Before leaving or
servicing machine, stop on level
surface, set parking brake, turn off
machine, and remove key.
3. Loosen the two retainer knobs, one at each
end of the squeegee.
New & Reconditioned Equipment & Parts - www.southeasternequipment.net
