OPERATION
EZ Rider 330730 (12--00)
26
DOUBLE SCRUBBING
Double scrubbing is the process of making two or
more scrubbing passes over a heavily soiled area.
The first scrubbing pass is made with the rear
squeegee up to allow the solution to soak into the
floor.
Press the
scrub switch
to start the normal
scrubbing operations.
Press the
rear squeegee switch
to raise the rear
squeegee and turn off the vacuum system.
Use the maximum solution flow setting and a
higher brush pressure setting. Let the solution
remain on the floor for 10 to 15 minutes, then
make a second scrubbing pass with the rear and
side squeegees down.
FOR SAFETY: When using machine, go
slow on inclines and slippery surfaces.
OPERATION ON INCLINES
Drive the machine slowly on inclines.
FOR SAFETY: When using machine, go
slow on inclines and slippery surfaces.
The maximum rated climb and descent incline
with empty tanks is 11
_
, with full tanks is 4
_
.
FOR SAFETY: Before leaving or
servicing machine, stop on level
surface.
New & Reconditioned Equipment & Parts - www.southeasternequipment.net