Tennant 285, Руководство оператора

Страница: 46 / 136

OPERATION
2-24
285 MM191 (12---89)
TO INSTALL HOPPER WITH DOLLY
1. Stop the engine and set the machine parking
brake.
FOR SAFETY: Before leaving or servicing the
machine; stop on level surface, set parking brake,
and turn off machine.
2. Roll the hopper into position in the machine.
3. Position the lift arm pins in the lift arm slots.
Push the lift arm hooks over the pins.
A
B
02752
LIFT ARM HOOK
A. Pin
B. Hook
4. Start the engine, raise the hopper, and place
the hopper lift and side brush lever in the
(Hopper Hold) position.
5. Stop the engine.
6. Roll the hopper dolly away from the machine.
7. Place the hopper lift and side brush lever in the
(Hopper Down) position.
8. Unlatch and remove the hopper cover.
9. Connect the wire harness connectors and the
vacuum hose(s) between the hopper and the
machine.
10. Reposition and latch the hopper cover on the
hopper.
SCRUB ATTACHMENT
The scrub attachment accessory gives the machine
the added flexibility to scrub floors. It consists of
three groups of parts --- the scrub attachment, the
side scrub brush and squeegee, and the rear
squeegee.
The scrub attachment and side scrub brush and
squeegee are to be removed when sweeping. The
rear squeegee may be left on the machine in the
“raised” position. The scrub attachment takes the
place of the sweeping hopper. The side scrub brush
and squeegee take the place of the side sweep
brush. The main sweeping brush is also exchanged
for a scrubbing variety brush in the conversion.
TO MOUNT SCRUB ATTACHMENT
1. Remove debris hopper with hopper dolly as
described in
TO REMOVE HOPPER WITH
DOLLY .
2. Stop the engine and set the machine parking
brake.
FOR SAFETY: Before leaving or servicing the
machine; stop on level surface, set parking brake,
and turn off machine.
3. Position top lift arm cams vertically.
4. Position the scrub attachment rear left cam
locking bracket in the “top” position.
A
02756
LOCKING BRACKET
A. Locking Bracket