Tennant 186, Руководство оператора

Страница: 30 / 88

OPERATION
186 MM159 (6–94)
2Ć18
SCRUB ATTACHMENT
The scrub attachment option gives the machine
the added flexibility to scrub floors. It consists of
four groups of parts––the solution tank and debris
tray, the side and main scrub brushes, the
recovery tank, and the rear squeegee.
The solution tank, debris tray, and side and main
scrub brushes are to be removed when sweeping.
The recovery tank and rear squeegee may be left
on the machine. The rear squeegee must be kept
in the “up” position to prevent being damaged
however. The solution tank and debris tray takes
the place of the sweeping hopper. The side scrub
brush takes the place of the side sweep brush.
The main sweeping brush is also exchanged for a
scrubbing brush in the conversion.
Rear squeegee and recovery tank installation are
covered in an instruction bulletin. Side scrub
brush installation is the same as side sweep
brush installation as covered in BRUSHES in the
MAINTENANCE section. Here we will only cover
routine solution tank and debris tray installation
and removal.
TO MOUNT SOLUTION TANK AND DEBRIS
TRAY
1. Stop the engine.
FOR SAFETY: Before Leaving Or Servicing
Machine; Stop On Level Surface, Set Parking
Brake, And Turn Off Machine.
2. Raise the filter assembly.
3. Remove the debris hopper.
4. Slide the solution tank into place on the
machine. Be sure the tank hanger brackets
engage the mounting pins.
5. Slide the debris tray under the solution tank.
A
B
03149
DEBRIS TRAY
A. Debris Tray
B. Handle Hanger
6. Place the tray handle on its hanger.