OPERATION
2Ć9
186 MM159 (6–94)
START SWITCH
The start switch
controls the engine starter
motor. To start the engine, turn the on-off switch
to the right and push the start switch.
NOTE: Do not engage the starter for more than
ten seconds at a time, or after the engine has
started, as the starter may be damaged.
KEY-OPERATED ON-OFF SWITCH
The key-operated on-off switch
has two
positions: off and on. To start the engine, turn the
key fully to the right to the on position. To stop the
engine, turn the key to the left to the off position.
ENGINE CHOKE KNOB
The engine choke knob controls the engine choke
which helps start cold engines. To engage the
choke, pull the knob out. To disengage the choke,
push the knob in. Do not choke a warm engine.
CIRCUIT BREAKERS AND FUSES
Circuit breakers are resetable circuit protection
devices designed to stop the flow of current in the
event of a circuit overload. Once tripped, circuit
breakers must be manually reset by pressing the
circuit breaker button in. If the overload which
caused the circuit breaker to trip is still present in
the circuit, the circuit breaker will continue to stop
current flow until the overload is corrected.
The circuit breakers are located on the instrument
panel.
The following chart shows the various circuit
breakers and the electrical components they
protect.
PROTECTIVE
DEVICE
RATING
CIRCUIT PROTECTED
CB–1
15 A
Shaker Motor
CB–2
15 A
Hour Meter,
Thermo-Sentry
,
Alternator
VACUUM SHUT-OFF KNOB
The vacuum shut-off knob
is present on
machines with the filter bypass option, vacuum
wand option, or the water pick-up option. The
knob controls the vacuum to the dust filter. To
stop vacuum to the dust filter, pull the knob out.
To vacuumize the dust filter, push the knob in.
PARKING BRAKE LEVER
The parking brake lever
controls the brake
on the front wheel.
To set the parking brake for machines below serial
number 002316, pull the handle back. To release
the parking brake, pull the quick-release notch.
To set the parking brake for machines serial
number 002316 to 005999, pull the handle up and
over the latch bracket. To release the parking
brake, pull the handle up, over and away from the
latch bracket.
To set the parking brake for machines serial
number 006000 and above, step on the lever and
release it into the long notch on the left. To
release the parking brake, step on the lever and
release it into the short notch on the right.
Always park on a level surface, stop the engine,
and engage the parking brake before leaving the
machine unattended and before working on the
machine.
Содержание 186
